The project, delivered as part of a wider life safety installation by Simple Life Safety Systems Limited, required a robust and compliant approach to smoke control and evacuation alert across two buildings with different heights and risk profiles. Block A is a 14‑storey, high‑rise residential block, while Block C is a smaller, four‑storey building. Each block was equipped with one SmokeGo panel and one EvacGo panel, providing dedicated control tailored to the specific needs of each structure.

SmokeGo was specified to deliver active smoke control via the fire system, supporting the management of smoke in common escape routes and critical areas. Designed to comply with EN 54 Parts 2 and 4, as well as BS 7346‑8 and ISO 21927‑9, SmokeGo enables automatic and manual control of smoke control fans and dampers from a single, intuitive interface. Its simple matrix‑based configuration allowed the project team to clearly define smoke compartments and cause‑and‑effect relationships, helping ensure smoke is contained and extracted effectively in the event of a fire.

EvacGo was installed as a fully independent BS 8629-compliant evacuation alert system, giving the fire and rescue service a reliable and secure means of alerting residents if evacuation beyond the affected flat is required. Each EvacGo panel is housed within a robust, tamper‑proof enclosure and is designed exclusively for use by the fire and rescue service, helping prevent misuse while ensuring clear, decisive control during an incident.

John Newton, Director Life Safety at Simple Group, commented: “John Street was a complex residential project that required careful coordination between smoke control and evacuation alert systems. Using SmokeGo and EvacGo allowed us to deliver a fully compliant solution that aligns with the fire strategy while giving the fire and rescue service the tools they need to manage incidents safely and effectively.”

The SmokeGo smoke control system and EvacGo evacuation alert system operate as separate dedicated life safety systems, ensuring smoke movement can be actively controlled while evacuation decisions remain firmly in the hands of the fire and rescue service. This layered approach supports resident safety without undermining the stay‑put strategy that underpins the building’s fire design.

Shaun Scott, Applications Engineer at Advanced, added: “Projects like John Street highlight the importance of implementing smoke control and evacuation alert systems correctly. SmokeGo makes complex smoke control logic far simpler to configure and manage, while EvacGo provides a clear, compliant evacuation alert solution. Together, they deliver confidence for installers, building managers, and emergency responders alike.”

With one SmokeGo panel and one EvacGo panel installed in each block, the John Street development now benefits from a coordinated life safety solution that addresses both smoke management and evacuation alerting in line with current best practice and regulatory guidance.

The project demonstrates how Advanced’s specialist systems can be combined to meet the evolving safety requirements of modern residential buildings, delivering compliant, practical solutions that prioritise both resident safety and operational simplicity.