ExGo 2/4 Way Relay Card2/4 Way Relay Card

The 2 or 8 Way Relay Output Card is an internal peripheral for use with The ExGo series control panels and status indicators.

This additional PCB provides a cost effective solution to providing 2 or 8 individually programmable 1 Amp rated, volt free, clean contact outputs.

The 2 or 8 Way Relay Output Card connects directly to the panels motherboard in which each output can be individually programmed.

Ideal for any application where a number of programmable outputs are required at the panel.

The features of the 2 or 8 Way Relay Output Card not only aid commissioning and cut down on expensive ancillary hardware but also allow the system to be easily configured to provide additional outputs for the more complex cause and effect configurations using standard products.

Key Features

  • 2 or 8 individual programmable outputs
  • Each output individually programmable
  • Fast response
  • Each output 30V AC/DC, 1 Amp rating
  • Cost effective against ancillary hardware
  • Optional fail safe setup
  • Easily programmable by on board keypad
Specification
Relay Outputs2 or 8 volt free contacts - 2 x changeover + 6 x normally open which can be inverted
Contact Rating1 Amp 30 V DC/AC maximum
Power Supply24 V DC (derived from panels motherboard)
Supply Current65 mA maximum (all relays energised)
ProtocolsAs per detector manufacturer’s specifications
Dimensions H x W x D mm70 x 105 x 18

Order Codes and Options

Exp-007*: 2 Way Relay Output Card - RSI Only
Exp-008*: 8 Way Relay Output Card - ExGo Only
*F: Relay Output Card fitted

Compatibility

The 2 Way Relay Output Card is fully compatible with the ExGo RSI panel only. Mounting pillars are provided on the back box to mount this card.

The 8 Way Relay Output Card is fully compatible with the ExGo Control panel only. Mounting pillars are provided on the back box to mount this card.

Limitations

Each output is fully programmable for any output function allowed within the ExGo control panel. Only one Relay O/P Card can be fitted to an ExGo control panel or Remote Status Indicator.